Felt
Humidity PrimerClean off loose material and make the old bituminous felt sound. Humidity Primer seals the porous, aged surface before the mat and base coat go on.
PrimerHumidity Primer
ReinforcedFull mat
Take fibreglass roofing to the next level
The most versatile fibreglass roofing system in the range, a naturally curing polyurethane for any flat roof, applied to new decks or straight over felt, concrete and asbestos.
What Fibrecoat does
A complete roof, not just a coat. Reinforced, seamless and cold-applied.
Reinforced and seamless
A 150gsm chopped-strand glass mat is fully embedded into the resin to form one continuous, encapsulated membrane with no joints or seams to fail.
eFlex movement tolerance
Engineered with eFlex, Allbase's flexibility technology, the cured film stretches and recovers as the roof moves instead of cracking, doing away with the need for expansion joints.
Certified and fire rated
BBA and ETA certified with 25-year expected durability, and BROOF(t4) rated, the highest classification, for fire performance on the roof.
Where it works
Over almost any surface. From felt and asphalt to concrete, metal, single ply and timber.
Fibrecoat overlays existing roofs as readily as it finishes new ones. The primer is matched to the substrate: some surfaces take the resin directly, others are sealed or activated first. Browse the surfaces to see how each one goes on.
Asphalt
Humidity PrimerMake sure blisters and cracks are made good first. Aged asphalt is sealed with Humidity Primer so the reinforced membrane bonds across the area.
PrimerHumidity Primer
ReinforcedFull mat
Concrete
Porosity SealerDry porous concrete is sealed with Porosity Sealer. Where moisture is present, Humidity Primer or Tecnocem handles damp decks and negative pressure.
PrimerMatched to moisture
ReinforcedFull mat
Metal
PU PrimerDegrease, remove any oxidation and abrade for a key. PU Primer activates bare or coated metal so the system bonds to the non-porous surface.
PrimerPU Primer
ReinforcedFull mat
Single ply
PU PrimerClean and activate the membrane with PU Primer, the activator for non-porous surfaces, before laying the reinforced base coat over it.
PrimerPU Primer
ReinforcedFull mat
Asbestos
Overlaying asbestos cement avoids disturbing the substrate. The primer is matched to its condition; confirm the specified primer for the build-up.
ReinforcedFull mat
Rubber EPDM
PU PrimerClean the membrane and activate with PU Primer so the reinforced system keys to the non-porous EPDM surface before overlay.
PrimerPU Primer
ReinforcedFull mat
Fibreglass / GRP
PU PrimerAbrade the gloss and activate with PU Primer, specified for GRP and old coatings, so the new membrane bonds to the existing surface.
PrimerPU Primer
ReinforcedFull mat
Lead
Lead is overlaid as a non-porous metal. Clean and key the surface; confirm the specified primer for the system before application.
ReinforcedFull mat
Wood / OSB
Humidity PrimerOn a sound timber or OSB deck, Humidity Primer seals the board before the mat and base coat form the waterproof layer over it.
PrimerHumidity Primer
ReinforcedFull mat
The system
Everything the roof needs. Resin, reinforcement, primers and detailing that work as one.
Fibrecoat resin
Single-component, cold-applied polyurethane that wets out the mat and moisture-cures to a seamless membrane. Base coat and second layer.
View component →Fibremat reinforcement
150gsm chopped-strand glass matting, embedded into the base coat to reinforce every detail and overlay across the membrane.
View component →Primers and sealers
PU Primer, Porosity Sealer, Humidity Primer and Tecnocem, matched to the substrate from rough membrane to damp concrete.
View component →Protex topcoat
A UV colour-stable polyurethane topcoat with chemical and abrasion resistance, available clear, pigmented or as a skid-deterrent finish.
View component →Sealants and tape
Flex 3000 and 3040 PU sealants and Butyl Tex bond-bridging tape seal joints, details and movement points across the system.
View component →Rollers and tools
Short-pile mohair rollers, spike rollers, buckets and the consumables for laying, embedding and consolidating the membrane.
View component →Peace of mind
Certified for 25 years. BBA and ETA approval behind a system built to last.
Fibrecoat carries both BBA and ETA certification, with 25-year expected durability when applied as specified, so the roof stays protected long after the job is done.
Certified and fire rated
BBA and ETA certified with 25-year expected durability, and BROOF(t4) rated, the highest classification, for fire performance.
View certification →Specified to your roof
Available as a cold-roof overlay, warm roof or inverted build-up, with the specification matched to building regulations for each project.
Talk to a specialist →UV-stable finish
A Protex topcoat adds UV colour stability with chemical and abrasion resistance, keeping the surface protected and looking right.
Ready to start?
Request access to browse and specify, or schedule a consultation to talk through your project with one of our specialists.
Schedule a consultation
Arrange a phone call with a specialist to discuss your application.
Choose a time