Flow media

A closed-mould process in which dry reinforcement is laid into a mould, sealed under a vacuum bag, and liquid resin is drawn through the fibre stack by vacuum alone. It achieves higher fibre content and lower void levels than open moulding, with much lower workshop emissions.

A sacrificial woven fabric laminated onto the surface of a laminate and torn off after cure, leaving a clean, uniformly textured surface ready for bonding or painting. Release-coated variants can transfer contamination and are generally avoided where structural bonding will follow.

A vessel placed in the vacuum line between the mould and the pump during infusion or wet bagging to intercept surplus resin before it can reach and damage the vacuum pump.

A consolidation technique in which a laminate is sealed under a flexible airtight film and the air is evacuated so that atmospheric pressure compacts the plies during cure. It removes trapped air and excess resin and is used with wet lay-up, prepreg and infusion processes.