Vapour control layerVCL

Condensation that occurs within the layers of a roof, wall or floor construction rather than on its internal surface, when water vapour moving through the build-up reaches a plane at or below its dew point temperature. It can degrade insulation, corrode fixings and decay timber, and is controlled through vapour control layers, ventilation and correct layer sequencing.

A roof construction in which the thermal insulation is placed above the structural deck, keeping the deck and supporting structure at close to internal temperature. A vapour control layer is normally installed on the warm side of the insulation to limit the risk of interstitial condensation.

A vapour-permeable but water-resistant membrane used on the cold side of insulation, typically as a pitched roof underlay or behind cladding, allowing water vapour to escape from the construction while resisting liquid water from outside.

A roof construction in which the insulation is placed at ceiling level below the structural deck, leaving the deck and the void above it at close to external temperature. The void normally requires ventilation to remove moisture vapour, and this arrangement is discouraged for flat roofs in current UK guidance because of condensation risk.