Browse every application guide, process note and piece of product advice. Filter by topic or sector to narrow things down.
Estimated curing times for the Overcoat system.
More information on the range of compatible primers and surface treatments for the Fibrecoat system.
Estimated curing times for the Fibrecoat system.
Humidity Primer is made up of both resin & hardener; once both components are homogeneously mixed together the primer will change to a white liquid.
Product information for the Tecnocem epoxy cement system Tecnocem is a three component waterborne epoxy-cement system designed to be applied over a porous (concrete) surface with high moisture.
Product information for the Fibrecoat Porosity Sealer Porosity Sealer is a single component, solvent based low viscosity primer designed for use as a general purpose primer for most well-dry porous.
Product information for the Fibrecoat PU primer PU Solvent is a single component, combination of strong organic solvents manufactured specifically for compatibility with Fibrecoat.
Product information for the Fibrecoat PU primer The Fibrecoat PU Primer is a single component, low viscosity primer/activator designed for priming non-porous surfaces such as exposed metal, PVC, old.
Summarising the different Fibrecoat system components available Fibrecoat is a liquid applied high performance; high build polyurethane coating for use on most roof surfaces including asphalt.
Details on how much catalyst you should use and mix into the Fibrelast resins and topcoats.