Datapoints
Allbase Intelligence scans the markets every day: official statistics, producer notices, trade rulings and research, checked at source, each with our view. Newest first.
Model finds glass fibre composite rail sleeper stays within stress limits
This is a computer model, not a track trial: no physical GFRP sleeper was loaded or run in service. Useful context for glass fibre demand in rail, but nothing to act on yet until field data appears.
Key Engineering MaterialsConstruction
Seashell-filled epoxy tested as insulation around a thermoelectric cooler
A shell-waste filler in epoxy, aimed at a niche thermal job. The source gave no methods or scale, so there is no way to judge the result; for epoxy buyers there is nothing to act on yet.
Experimental Heat TransferIndustrial
Bio-bonded straw and wood particleboards pass small-flame fire test in lab
Lab-made boards only, tested with a cone calorimeter and a single-flame ignition test, not a full façade fire test. Bio-based binders for façade panels are a long way from specification; nothing to act on yet.
FireConstruction
Eggshell powder and alumina nanoparticles tested as epoxy fillers in lab
A small hand lay-up lab study of five epoxy hybrids, with no service or scale-up data. Treated eggshell filler is an interesting low-cost idea, but nothing to act on yet for anyone buying epoxy systems.
Journal of Reinforced Plastics and CompositesIndustrial
Carbon and basalt hybrid anchors beat pure basalt bars in lab tests
Specimen-scale lab tests on hybrid carbon/basalt anchors, with no field or long-term durability data yet. Promising as a rebar alternative in ground anchoring, but there is nothing to act on yet for anyone specifying reinforcement.
Mechanics of Composite MaterialsConstructionCharted
Lab study compares two initiators for curing filled orthophthalic polyester composites
A lab comparison of two radical initiators in orthophthalic polyester with glass fibre and titanium dioxide whiskers. Useful for moulders chasing cooler, slower cures in thick laminates, but nothing to act on yet without production-scale trials.
Materials Science ForumIndustrial
Recycled PET turned into resin and tested in carbon fibre composite
Recycled PET as a resin feedstock for carbon fibre parts is a neat idea, but the record gives no scale, methods or results to judge it by. One journal paper; nothing to act on yet.
International Journal of Polymer Analysis and CharacterizationIndustrial
Cobalt phytate coating on carbon fabric cuts epoxy composite fire risk
A lab-scale treatment of carbon fabric gave epoxy laminates better flame resistance and strength together. No production data or cost yet, so nothing to act on yet for aerospace or industrial carbon-epoxy specifications.
Advanced Composites and Hybrid MaterialsAerospaceCharted
Lab study tests heat treatment for recovering glass fibre from old blades
Lab-scale thermal tests on blade waste, not a working recycling process. Hotter pyrolysis leaves cleaner glass fibre but more damage, so recycled fibre for structural laminates remains some way off; nothing to act on yet.
Polymer CompositesGreen energy
Flame-retardant hybrid epoxy laminates cut heat release in lab fire tests
Lab laminates of hybrid epoxy released far less heat in cone calorimeter tests, at one thickness and one heat flux. HB is a basic plastics rating, not a building fire class, so nothing to act on yet.
MDPI (Materials)Industrial
Steered fibre paths raise buckling load of stiffened composite panel in simulation
Steering fibres in a stiffened panel raised its buckling resistance, but only in a computer model; no panel was built or tested. Nothing to act on yet, even for aerospace laminates made by automated fibre placement.
SAGE Publications (Journal of Reinforced Plastics and Composites)Aerospace
Lab panels of recycled PET cladding tested for strength and heat
Small lab panels only, and cladding that melts at 300 °C is far from what facade fire rules expect. Interesting as a use for waste plastic and tyres; nothing to act on yet.
Springer Nature (Discover Civil Engineering)Construction
Hybrid glass and polypropylene epoxy laminates resist seawater better over 30 days
A single lab study of E-CR glass and polypropylene hybrid epoxy laminates, aged in seawater for 30 days. Promising for marine work, but a month is short and nothing here changes a specification today: nothing to act on yet.
MDPI PolymersMarine
Silica and alumina nanoparticles cut shrinkage in polyurethane/epoxy grout
Lab results only, so not yet a basis for specification, but if nanoparticle-reinforced polyurethane/epoxy grouts reach the market they could suit crack injection and ground consolidation where shrinkage gaps are a risk. Specifiers should expect to ask for independent field data, cure behaviour and pricing before weighing them against established systems.
WileyConstruction
Ready to start?
Request access to browse and specify, or schedule a consultation to talk through your project with one of our specialists.
Schedule a consultation
Arrange a phone call with a specialist to discuss your application.
Choose a time