Trimming

The removal of a cured or solidified part from its mould, using wedges, compressed air or mechanical ejection. Poor demoulding practice is a major source of gel coat damage, mould wear and part distortion.

Separation of the plies within a laminate, caused by impact, manufacturing defects, fatigue or moisture ingress. Because it can spread unseen beneath an undamaged surface and sharply reduces compressive strength, delamination is a primary target of non-destructive inspection.

The moulds, mandrels, jigs and fixtures on and in which parts are laminated, formed and cured. Tooling material selection, from GRP and epoxy tooling board through to nickel alloy and steel, is driven by cure temperature, thermal expansion match, accuracy requirements and production volume.